RLPlot

RLPlot is a GUI based program for displaying scientific data in standard formats. It has full support for all error-bar types and it has greater flexibility with displaying colour and texture in charts than gnuplot.

http://rlplot.sourceforge.net/

endnote

Personal Bibliographic Management Software, PBMS

reference
http://ot9122.myweb.hinet.net/research/endnote/

ImageJ

ImageJ is a public domain, Java-based image processing program developed at the National Institutes of Health.
http://rsbweb.nih.gov/ij/index.html

reference
http://www.uhnresearch.ca/facilities/wcif/imagej/
http://a-chien.blogspot.com/search/label/ImageJ
http://blog.lifescienceonline.net/2009/01/imagej
http://ggene.cn/html/protocol/ruanjianjiaocheng/2009/0421/284.html
http://nanpao.pixnet.net/blog/post/18257638
http://www.mun.ca/biology/dinnes/B2250/Lab2/ImageJ.htm
http://tw.myblog.yahoo.com/lordliu/

download files
http://rsbweb.nih.gov/ij/download.html

台制單位

公制長度
1公尺=100公分
1公分=1公釐

英制長度與公制長度
1英吋=2.53999公分
1英呎=30.48公分

台製長度與公制長
1台分=3.03公釐
1台寸=3.03公分
1台尺=30.3公分
1碼=3台尺=90.9公分

公制面積、體積換算公式
1公尺×1公尺=1平方公尺
平方公尺×0.3025坪=坪數

台制面積換算公式
1台尺×1台尺=1才
1平方公尺=11才
36才=1坪
台尺×台尺÷36才=坪數
長×寬×厚=立方才

Troubleshooting of Arduino Severino

Good data from "Madworm" of Arduino forum:
http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?action=print;num=1243607033

madworm wrote:

Did you already do the RX/TX pin loopback test ?

Take a wire and connect RESET to GND to disable the microcontroller.
Then take another wire and short pin-0 and pin-1.

Use the serial monitor and input some text. If you press SEND, it should be echoed back.
If that works, it may be a bootloader problem or a dead chip.

You can try changing the upload speed of the IDE for your board. It's either 19200 or 57600.
Changes need to be made in boards.txt + restart of the software.

I just do that and review text descritp, then done. Thanxs madworm

My Arduino Severino Working... 呵呵

說起來也真剛好,因為正在上初級8051的課程,老師還是用傳統LPT或COM的ISP cable燒韌體,可是NB就只有USB,google一下,用USB燒錄單晶片的FREESOURCE有USBTinyISP與USBASP等等,為何選USBASP,我也不知道,反正找到資料就試了www.fischl.de/usbasp/
先是用洞洞板做了一塊(照片待續...),用公版韌體,但怎麼試都無法順利驅動它,搞了快一個多月,也看了很多線上資料,無奈還是沒有解決問題,最終的結論是>>>>FUSE<<<<的設定,找對方向,問題就容易解決.
也順利完成USBASP for 89S功能...(待續...),
離題了,原先就是用Severino S3V3的板子,來燒錄ATMega8,完成了USBASP後,接著處理Arduino,這次就只花一天的時間解決韌體的燒錄及測試bling 13 led的功能,剛開始也是讓下列這些訊息給絆住
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51
結果還是fuse的設定呀

USBASP終於完成了

奮戰了兩個禮拜,在今天終於有個成果了,實在很累人....路不轉人轉,必有道路


這個FUSE的設定是有誤的,網路上很多資料,但10篇裡頭,正確的卻少之又少,試得很累人,有待客倌讓我慢慢道來...